Duke3D for the gp2x
Version 0.02
Ported by Woogal from the icculus sdl port.
Source available at http://gp2x.sector808.org
Please see http://gp2x.sector808.org and http://wiki.gp2x.org/wiki/Duke2X for lastest information.

Installation
------------

Place duke3d.gpe anywhere. Additional files needed from either a shareware or retail version of Duke3D are duke3d.cfg and duke3d.grp. These files should be in the same folder as duke3d.gpe If you are using the Atomic Edition then you will also need the files defs.con, game.con and user.con from the CD. If you are using version 1.3 then use the .con files included in this zip. Using any other version of the .con files with 1.3 will almost certainly cause strange problems, as will using the included .con files with the Atomic Edition. .con files should also be in the same folder as duke3d.gpe

To get sound, make sure the FXDevice in duke3d.cfg is set to 0. NumBits can be 8 or 16, and MixRate should be 16000.

To get music, set MusicDevice to 0. You will also need to install the timidity patches by downloading http://www.libsdl.org/projects/SDL_mixer/timidity/timidity.tar.gz and extract it to the root of your SD card. The timidity folder must be in the root of the card or music will not play.

Controls
--------

Press the stick to select menu items, B to go back. If the stick button stops responding in the menus use A instead. Press Start+Select together to return to the menu when in the game. Game controls can be defined from the options screen.

Misc
----

To save options, make sure you exit from Duke3D. After exiting or saving a game, wait a few seconds before switching off or removing the SD card to ensure details are saved correctly.

Changes
-------

0.02

Music added.
Problems solved with version 1.3 (jump and other gravity problems should be fixed).
Version 1.5 now works.
B can be assigned from options screen.

woogal@sector808.org
http://gp2x.sector808.org